Firmness and force relaxation characteristics of tomatoes stored intact or as slices.
Wu, T. X., and Abbott, J. A
Postharvest Biology and Technology. Volume 24, Number 1, 2002. Pages 59-68.
2002
บทคัดย่อ
Firmness is an important aspect of the quality of fresh tomatoes. Its measurement is necessary for quality control, as well as for postharvest studies to develop procedures for preparation and handling of fresh-cut tomato slices. This study had two objectives, to determine how initial ripeness and cutting affect the textural changes in tomato (cv. Sunbeam, harvested from Beltsville, Maryland, USA) tissue during storage and to develop a method for measuring textural attributes of tomato slices. Firmness and force relaxation characteristics were compared for tomato flesh harvested at six maturity stages and stored intact or as slices for 0-20 days. Measurements were made at three sites in the outer pericarp and three in columellar tissue on 7-mm thick transverse slices. Following loading, stress relaxation was recorded for 10 seconds. A 4-mm cylindrical probe provided more consistent firmness measurements (lower % coefficient of variation, CV) than a 6.4-mm spherical probe at harvest, and distances of 3 mm provided more consistent results than 1 mm. Therefore, stored tomato samples were tested only with the 4-mm cylindrical probe and distance of 3 mm. Fmax (maximum force) of freshly harvested tomatoes ranged from 15 to 2 N for mature green and red tomatoes, respectively. Fmax was closely related to loading energy (area), slope, and yield force; i.e. all four parameters measured elastic behaviour. Fmax also was related (r2=0.77-0.97) to forces at specific relaxation times. Tomatoes stored intact generally had lower CVs than those sliced before storage, although there was little difference in average firmness (Fmax) between the two at a given storage time for a given initial ripeness. A three-parameter model was developed to fit the relaxation curves: Y=1-Aln(1+t)-Bt/(C+t) where t is relaxation time. There was little correlation between Fmax and the three relaxation parameters (r2=0-0.33), i.e. the relaxation parameters measured a different physical property, presumably viscoelasticity. The responses of the relaxation parameters over storage time were dependent on the initial maturity of the tomatoes; but values usually differed significantly between tomatoes stored intact or sliced, with tomatoes sliced before storage generally having higher values, which we interpret as having lower viscoelasticity.